Free Case Evaluation Available 24/7

Who Is Responsible for Injuries Caused by Defective Construction Equipment in New York?

A worker assisting an injured coworker at a construction site

Suffering a serious injury at work can be devastating, but especially so when the accident was entirely out of your control. You may have used equipment correctly and followed safety standards, yet a design flaw or malfunction caused your injury.

Understanding whether a certain party may be legally liable for your accident helps you explore your options for moving forward. Depending on the circumstances of your accident, you may qualify for both a workers’ compensation claim and a third-party liability claim. A construction accident lawyer in NYC can provide legal guidance through this difficult time.

Understanding Construction Injuries Caused by Defective Equipment

Construction work often involves dangerous equipment, and even when tools function as expected, accidents can still happen. The National Safety Council reports that injuries resulting from contact events are the third-leading cause of work-related death and the leading cause of Days Away From Work (DAFW) cases. In 2024, 756 workers died due to contact events.

These “contact events” are injuries resulting from contact between the injured person and the source of injury, such as equipment, a person, or an animal. Approximately 10% of all contact incidents that caused days away from work, job restriction, or transfer between 2023 and 2024 happened in the construction industry.

Defective equipment is a common source of contact injuries. These accidents often fall under product liability law, which holds manufacturers, distributors, and sellers responsible for injuries caused by unsafe or defective products. The three main types of defects under product liability laws are as follows:

  • Manufacturing defects, which happen when a product was designed safely but an error occurred during production
  • Design defects, which occur when a design flaw is built into the product’s blueprint, meaning every unit shares the same hazardous characteristic
  • Failure to warn, which happens when a product was made safely but the manufacturer failed to warn about non-obvious hazards

Pursuing Product Liability Claims in New York for Defective Construction Equipment

The product manufacturer, distributor, or seller is often liable for injuries caused by defective equipment. New York has a strict liability standard for defective products. This means that injured consumers do not need to prove the company was negligent, just that the product had a defect when it left the seller’s control and that the defect caused the injury.

You would also need to prove you used the product as intended or in a foreseeable manner. Witness testimony or security camera footage can help support this claim. Your New York construction accident lawyer can also help you gather evidence and understand whether you may have a strong product liability claim.

When an Owner or Contractor May Be Held Liable for Defective Equipment Injuries

Parties aside from the manufacturer may also be responsible for a defective construction equipment injury. New York labor laws may hold owners or contractors liable in certain cases.

  • Labor Law Section 240: Known as the Scaffold Law, this labor law holds property owners and general contractors strictly liable for gravity-related injuries when the safety devices provided failed to protect the worker from an elevation hazard. If you were injured because a scaffold, ladder, hoist, or fall arrest system failed, you might have a claim under the Scaffold Law.
  • Labor Law Section 241(6): Property owners and general contractors may also be liable when defective equipment violates the New York State Industrial Code and causes an injury.
  • Labor Law Section 200: When property owners and general contractors have supervisory control over the work being performed with defective equipment and an accident occurs, Labor Law Section 200 may establish liability.

A construction accident lawyer in New York can review your case to help you understand whether any of these labor laws may impact liability for your worksite accident.

Potential Damages After a Defective Construction Equipment Injury

After a construction accident, it’s important to explore all potential liable parties so you can better understand your options for pursuing compensation. If your injury happened in the course of your job duties, you likely qualify for workers’ compensation, which can pay out a portion of your lost wages and reimburse you for related medical expenses. But this benefit may not sufficiently cover the financial burden of recovering from a serious injury.

If you can prove that a third party is liable for your accident, you may be able to pursue a civil lawsuit against them for additional damages. These may include your full lost wages, loss of earning capacity, and non-economic costs, such as:

  • Pain and suffering
  • Loss of quality of life
  • Emotional distress
  • Mental anguish

Contact a New York Construction Accident Attorney for Guidance

Pinpointing liability after a serious construction accident can feel overwhelming. A New York construction accident lawyer can provide legal guidance and support while you focus on recovering from your construction site injuries.

Dervishi Law Group, P.C., represents injured construction workers throughout NYC. We help clients identify liable parties and pursue all applicable compensation options. Contact us today at 718-484-4757 for a free consultation.

Frequently Asked Questions

What is the statute of limitations for construction defect injury cases in New York?

The statute of limitations for construction defect injury cases in New York is generally three years from the date of the accident. This deadline applies to negligence cases resulting in personal injury and to product liability cases.

Can you hold your employer liable for a defective equipment accident?

You typically cannot pursue construction accident liability cases against your employer in New York, as you would instead file a workers’ compensation claim. But if another party was liable, such as the property owner or a general contractor, you may have a case against them.

What type of negligence state is New York?

New York is a pure comparative negligence state for most personal injury cases. This means an injured person can seek compensation from a liable party even if they are mostly at fault for their own accident. Your New York construction accident lawyer can explain how this standard may impact your case.

About The Author

Picture of Fatos Dervishi, Esq.

Fatos Dervishi, Esq.

A personal injury attorney, with offices in the Bronx and Manhattan, Fatos Dervishi has years of experience handling cases in New York. Mr. Dervishi, who grew up in Albania, obtained his law degree in 1989 from the Tirana University School of Law. He then worked as a special agent of the General Investigations Office with an office in Tirana, before being elected Deputy Attorney General by the Albanian Parliament in 1994. He served as Deputy Attorney General of Albania from 1994 to 1998.

Quick Contact

Contact Info

Address 1:
2322 Arthur Ave., Suite 3A
Bronx, New York 10458

Address 2:
18 East 41st. Street, 6th Floor
New York, NY. 10017

Office: (718) 484-4757 
Cell: (917) 496-8342
Fax: (718) 484-4758